Mô tả sản phẩm
ECMA-E31305ES+ASD-A0421-AB
ECMA-E31305ES+ASD-A0421-AB
|
MODEL |
ASD-A0421-AB |
|||
|
CORRESPONDING SERVO MOTOR |
ECMA-C30604_S (S=14MM) ECMA-C30804_7 (7=14MM) ECMA-E31305_S(S=22MM) ECMA-G31303_S(S=22MM) |
|||
|
POWER |
400W |
|||
|
POWER SUPPLY |
PHASE / VOLTAGE |
SINGLE-PHASE: 200~255VAC,50 / 60HZ ±5% |
||
|
CONTINUOUS OUTPUT CURRENT |
2.6ARMS |
|||
|
COOLING METHOD |
NATURAL AIR CIRCULATION |
|||
|
ENCODER RESOLUTION /FEEDBACK RESOLUTION |
2500PPR / 10000PPR |
|||
|
CONTROL OF MAIN CIRCUIT CONTROL |
SVPWM CONTROL |
|||
|
TUNING MODES |
AUTO/ MANUAL |
|||
|
DYNAMIC BRAKE |
BUILT-IN |
|||
|
POSITION CONTROL MODE |
MAX. INPUT PULSE FREQUENCY |
MAX. 500KPPS (LINE DRIVER) / MAX. 200KPPS (OPEN COLLECTOR) |
||
|
PULSE TYPE |
PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE |
|||
|
COMMAND SOURCE |
EXTERNAL PULSE TRAIN / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS AND P-CURVE FILTER |
|||
|
ELECTRONIC GEAR |
ELECTRONIC GEAR N/M MULTIPLE N: 1~32767, M:1:32767(1/50<N/M<200) |
|||
|
TORQUE LIMIT OPERATION |
SET BY PARAMETERS |
|||
|
FEED FORWARD COMPENSATION |
SET BY PARAMETERS |
|||
|
SPEED CONTROL MODE |
ANALOG INPUT COMMAND |
VOLTAGE RANGE |
0 ~ ±10 VDC |
|
|
INPUT RESISTANCE |
10 KΩ |
|||
|
TIME CONSTANT |
2.2 US |
|||
|
SPEED CONTROL RANGE*1 |
1 : 5000 |
|||
|
COMMAND SOURCE |
EXTERNAL ANALOG SIGNAL / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS AND S-CURVE FILTER |
|||
|
TORQUE LIMIT OPERATION |
SET BY PARAMETERS OR VIA ANALOG INPUT |
|||
|
RESPONSIVENESS CHARACTERISTIC |
MAXIMUM 450HZ |
|||
|
SPEED FLUCTUATION RATE *2 |
0.01% OR LESS AT LOAD FLUCTUATION 0 TO 100% (AT RATED SPEED) |
|||
|
0.01% OR LESS AT POWER FLUCTUATION ±10% (AT RATED SPEED) |
||||
|
0.01% OR LESS AT AMBIENT TEMPERATURE FLUCTUATION 0 TO 50 DEGREE CENTIGRADE (AT RATED SPEED) |
||||
|
TORQUE CONTROL MODE |
ANALOG COMMAND INPUT |
VOLTAGE RANGE |
0 ~ ±10 VDC |
|
|
INPUT RESISTANCE |
10 KΩ |
|||
|
TIME CONSTANT |
2.2 US |
|||
|
COMMAND SOURCE |
EXTERNAL ANALOG SIGNAL / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS FILTER |
|||
|
SPEED LIMIT OPERATION |
PARAMETER SETTING OR VIA ANALOG INPUT |
|||
|
ANALOG MONITOR OUTPUT |
MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V) |
|||
|
COMMUNICATION INTERFACE |
RS-232 / RS-485 / RS-422
|
|||
| MODEL | ECMA-E31305ES |
| PRODUCT NAME | ELECTRONIC COMMUTATION MOTOR |
| SERVO TYPE | AC SERVO |
| NAME OF THE SERIES | ASD-B |
| RATED VOLTAGE | 220V |
| SENSOR TYPE | 2500PPR |
| MOTOR FRAME SIZE | 130MM |
| TYPE OF SHAFT DIAMETER AND OIL SEAL | KEYWAY W/O BRAKE W/O OIL SEAL |
| SHAFT DIAMETER | S=22MM |
| RATED POWER OUTPUT | 500W |
| RATED TORQUE (N-M)*1 | 2.39 |
| MAX. TORQUE (N-M) | 7.16 |
| RATED SPEED | 2000 RPM |
| MAX. SPEED | 3000 RPM |
| RATED CURRENT (A) | 2.9 |
| MAX. CURRENT (A) | 8.7 |
| POWER RATING (KW/S)(WITHOUT BRAKE) | 7 |
| ROTOR MOMENT OF INERTIA(× 10 -4 KG.M2 ) (WITHOUT BRAKE) | 8.17E-4 |
| MECHANICAL TIME CONSTANT(MS) (WITHOUT BRAKE) | 1.91 |
| TORQUE CONSTANT-KT (N-M/A) | 0.83 |
| VOLTAGE CONSTANT-KE (MV/(R/MIN)) | 30.9 |
| ARMATURE RESISTANCE (OHM) | 0.57 |
| ARMATURE INDUCTANCE (MH) | 7.39 |
| ELECTRICAL TIME CONSTANT (MS) | 12.96 |
| INSULATION CLASS | CLASS A (UL), CLASS B (CE) |
| INSULATION RESISTANCE | > 100 M OHM, DC 500 V |
| INSULATION STRENGTH | AC 1500V, 60 SEC |
| WEIGHT (KG) (WITHOUT BRAKE) | 6.8 KG |
| MAX. RADIAL SHAFT LOAD (N) | 490 |
| MAX. THRUST SHAFT LOAD (N) | 98 |
| VIBRATION GRADE (ΜM) | 15 |
| OPERATING TEMPERATURE | 0~40 DEGREE CENTIGRADE |
| STORAGE TEMPERATURE | -10~80 DEGREE CENTIGRADE |
| OPERATING HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| STORAGE HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| VIBRATION CAPACITY | 2.5G |
| IP RATING | IP65 |
| APPROVALS | CE UL |
| MODEL | ECMA-E31305ES |
| PRODUCT NAME | ELECTRONIC COMMUTATION MOTOR |
| SERVO TYPE | AC SERVO |
| NAME OF THE SERIES | ASD-B |
| RATED VOLTAGE | 220V |
| SENSOR TYPE | 2500PPR |
| MOTOR FRAME SIZE | 130MM |
| TYPE OF SHAFT DIAMETER AND OIL SEAL | KEYWAY W/O BRAKE W/O OIL SEAL |
| SHAFT DIAMETER | S=22MM |
| RATED POWER OUTPUT | 500W |
| RATED TORQUE (N-M)*1 | 2.39 |
| MAX. TORQUE (N-M) | 7.16 |
| RATED SPEED | 2000 RPM |
| MAX. SPEED | 3000 RPM |
| RATED CURRENT (A) | 2.9 |
| MAX. CURRENT (A) | 8.7 |
| POWER RATING (KW/S)(WITHOUT BRAKE) | 7 |
| ROTOR MOMENT OF INERTIA(× 10 -4 KG.M2 ) (WITHOUT BRAKE) | 8.17E-4 |
| MECHANICAL TIME CONSTANT(MS) (WITHOUT BRAKE) | 1.91 |
| TORQUE CONSTANT-KT (N-M/A) | 0.83 |
| VOLTAGE CONSTANT-KE (MV/(R/MIN)) | 30.9 |
| ARMATURE RESISTANCE (OHM) | 0.57 |
| ARMATURE INDUCTANCE (MH) | 7.39 |
| ELECTRICAL TIME CONSTANT (MS) | 12.96 |
| INSULATION CLASS | CLASS A (UL), CLASS B (CE) |
| INSULATION RESISTANCE | > 100 M OHM, DC 500 V |
| INSULATION STRENGTH | AC 1500V, 60 SEC |
| WEIGHT (KG) (WITHOUT BRAKE) | 6.8 KG |
| MAX. RADIAL SHAFT LOAD (N) | 490 |
| MAX. THRUST SHAFT LOAD (N) | 98 |
| VIBRATION GRADE (ΜM) | 15 |
| OPERATING TEMPERATURE | 0~40 DEGREE CENTIGRADE |
| STORAGE TEMPERATURE | -10~80 DEGREE CENTIGRADE |
| OPERATING HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| STORAGE HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| VIBRATION CAPACITY | 2.5G |
| IP RATING | IP65 |
| APPROVALS | CE UL |
Đánh giá
Chưa có đánh giá nào.